construction formwork: How to use plastic construction formwork?

Plastic construction formwork is an excellent replacement of plywood formwork.

Then, how to use plastic construction formwork?

Method of use as well as wooden formwork, plastic construction formwork reinforcement direction with batten direction placed in cross shaped.

No need to smear the mold release agent before using plastic construction formwork.

When cast-in-place the flat plate, spacing between the keels should be 20 ~ 25 cm, and the spacing between the wall plate and keels hould be 10 ~ 20 cm.

Plastic construction formwork is no need of releasing agent.

The seam-line between plastic construction formwork should be taped.The length of nail should not be too long, generally about 30 ~ 35 mm.The strength to drive nails should be moderate.

When removing the plastic construction formwork, please start from the small part of one end, the support and the plates should be removed at the same time aiming at preventing the template widespread drops, don't let the corner drop on the ground vertically.

The plastic construction formwork is accesses to be mixed used with wood veneer, bamboo veneer and other material plate.